loading

Professional One-Stop Electronic Waste Recycling Machine Manufacturer - HUATAO Machine

Equipment Needed to Produce Rubber Granules from Waste Tires

Equipment Needed to Produce Rubber Granules from Waste Tires

Producing rubber granules from waste tires requires a complete mechanical recycling system that can reduce whole tires into smaller particles, remove steel wire and textile fibers, and classify the finished rubber by size. The most important machines include a tire shredder, rubber granulator, magnetic separator, fiber separator and vibrating screening machine. Depending on incoming tire condition and production requirements, the line may also need a tire debeader, tire cutter, secondary shredder, conveyors and dust collection equipment.

The best equipment configuration depends on required rubber granule size, processing capacity, tire types and final product quality. For complete line planning, see WASTE TIRE CRUSHING AND GRINDING PRODUCTION LINE and THE COMPLETE TIRE RECYCLING LINE ENGINEERING A SUSTAINABLE FUTURE FOR END OF LIFE TYRES.

1. How Does a Waste Tire Recycling Line Produce Rubber Granules?

A typical mechanical tire recycling process follows these stages:

  1. Tire inspection and preparation.

  2. Steel bead wire removal, when required.

  3. Primary tire shredding.

  4. Secondary size reduction.

  5. Magnetic separation of steel wire.

  6. Rubber granulation.

  7. Textile fiber removal.

  8. Vibrating screening and particle classification.

  9. Oversized material recycling and finished-product collection.

The exact process varies according to tire type and final product requirements. Primary shredding produces tire pieces, secondary processing reduces their size, and granulation produces rubber particles. Steel and textile removal are important separation stages.

2. Main Equipment Needed to Produce Rubber Granules

2.1 Tire Debeader – Remove Steel Bead Wire

Waste tires contain reinforced steel wire, particularly in the bead area. A tire debeader uses a mechanical pulling system to extract this wire from the tire structure. Its main functions are removing steel bead wire before shredding, recovering valuable steel separately, reducing heavy bead wire entering the shredder, and helping protect downstream cutting equipment.

A tire debeader is useful when processing whole passenger or truck tires, but it is not mandatory for every recycling system. The decision depends on tire construction, shredder design and process configuration. For steel wire extraction, see TYRE WIRE EXTRACTOR DRAWING MACHINE.

Industrial tire debeader extracting reinforced steel bead wire from a discarded tire before shredding.

2.2 Tire Cutter – Prepare Large or Bulky Tires

A tire cutter reduces whole tires or large tire sections into smaller pieces before shredding. It can be particularly useful when processing large truck or agricultural tires, handling oversized tires that are difficult to feed directly, preparing irregular tire sections for a shredder, and improving feeding stability.

Not every plant needs a separate tire cutter. For smaller tire streams, a suitable primary shredder may accept whole tires directly.

Heavy-duty tire cutter dividing large discarded tires into smaller sections for recycling. Caption: Tire cutting equipment helps prepare oversized tires for safer and more manageable feeding.

2.3 Double-Shaft Tire Shredder – Primary Size Reduction

The double-shaft tire shredder is one of the most important machines in a mechanical tire recycling line. It uses two counter-rotating shafts equipped with cutting blades to tear and shear tires into smaller pieces.

Its main functions include reducing whole tires into manageable tire chips, processing rubber containing steel and textile reinforcement, preparing material for secondary size reduction, and providing consistent feed for downstream separation equipment. The output size depends on blade configuration, shaft design, tire construction and machine settings. A primary shredder is not normally expected to produce finished rubber granules directly. For primary shredding, see DOUBLE SHAFT SHREDDER MACHINE and specific models such as 1200 TYPE DOUBLE SHAFT SHREDDER and 1000 TYPE DOUBLE SHAFT SHREDDER.

Heavy-duty industrial double-shaft shredder processing whole waste tires into smaller rubber pieces.

2.4 Tire Rasper or Secondary Shredder – Further Size Reduction

After primary shredding, tire chips may still contain steel wire embedded in the rubber. A tire rasper or secondary shredder reduces these chips further. This process helps release steel reinforcement so it can be removed more effectively. Depending on production-line design, the equipment may produce intermediate rubber particles suitable for subsequent granulation and separation.

This stage is important because metal that remains embedded in rubber can lower finished-product purity and create additional wear in downstream machines. For secondary size reduction, see CRUSHER MACHINE.

2.5 Magnetic Separator – Remove Steel Wire

Waste tires contain substantial steel reinforcement. Once shredding and secondary processing have released this steel, magnetic separators can remove it from the rubber stream. Common equipment options include suspended overband magnetic separators, permanent magnetic separators, magnetic drum separators and magnetic conveyor systems.

Magnetic separation may be installed at more than one stage because additional steel wire can become exposed during further size reduction. A second magnetic separation stage after granulation can help capture smaller metal fragments released later in the process.

industrial magnetic separator removing liberated steel wire from shredded waste tire rubber on a conveyor belt.

2.6 Rubber Granulator – Produce Rubber Granules

The rubber granulator is the core size-reduction machine when the target product is rubber granules. It receives prepared tire rubber and reduces it into smaller particles through mechanical cutting or shearing.

The granulator helps produce more uniform rubber particles, further release residual steel wire, prepare rubber for fiber separation, and achieve the required product-size range. The granulator should be selected according to feeding size, required output range, hourly processing target and expected maintenance requirements.

ndustrial rubber granulator reducing processed tire chips into smaller recycled rubber particles.

2.7 Fiber Separator – Remove Textile Contamination

Besides steel, waste tires contain textile reinforcement, including synthetic fibers. A fiber separator typically uses airflow and differences in material behavior to separate lightweight textile fibers from heavier rubber particles. Common separation equipment includes air classifiers, zigzag air separators, fiber suction systems and vibrating separation units.

Effective fiber removal is important for applications where buyers require cleaner rubber granules, such as selected rubber flooring, molded products and sports-surface materials. The separation result depends on the amount of fiber released during previous processing, particle size, airflow and material distribution. For screening equipment, see VIBRATING SCREEN MACHINE.

industrial rubber granulator reducing processed tire chips into smaller recycled rubber particles.

2.8 Vibrating Screen – Classify Finished Rubber Granules

A vibrating screen separates rubber particles according to size. For example, a plant may produce several commercial particle-size grades according to customer requirements. The screening system can separate different granule sizes, remove oversized particles, collect undersized material where specified, and return unsuitable particles to the granulator for further processing.

A closed-loop system with oversize recirculation helps maintain more consistent product sizing and reduces the amount of material that must be rejected.

Industrial air separation machine removing lightweight textile fibers from granulated waste tire rubber.

3. Complete Equipment List for Rubber Granule Production

Equipment Main function Necessity
Tire debeader Extract steel bead wire Application-dependent
Tire cutter Cut large or bulky tires Application-dependent
Double-shaft tire shredder Primary tire size reduction Essential
Tire rasper / secondary shredder Further size reduction and steel liberation Commonly required
Magnetic separator Remove steel wire Essential
Rubber granulator Produce target rubber granule size Essential
Fiber separator Remove textile fibers Essential for cleaner granules
Vibrating screen Classify granules by size Essential for controlled product sizing
Conveyor system Transfer materials between machines Essential
Dust collection system Control airborne dust Required according to process and risk assessment
Packaging equipment Collect and package finished granules Optional, depending on plant setup

4. What Rubber Granule Sizes Can a Recycling Line Produce?

The required granule size depends on the buyer’s application and product specification.

Rubber product General description Possible application
Coarse rubber chips Larger shredded pieces Further processing and selected industrial uses
Rubber granules Several-millimeter particles Rubber products and molded materials
Fine crumb rubber Smaller classified rubber particles Flooring, sports surfaces and rubber compounds
Fine rubber powder Very small ground particles Specialized rubber manufacturing

Producing fine crumb rubber or powder requires additional grinding and classification beyond a conventional granule-production line. It is therefore important to distinguish between a rubber granulator, which produces granules, and a rubber grinding mill, which reduces prepared granules into much finer particles.

5. How to Choose the Right Waste Tire Recycling Equipment

Before purchasing a rubber granule production line, evaluate these factors:

  1. Tire types: Confirm whether the plant will process passenger car tires, truck tires, agricultural tires or other tire categories.

  2. Production capacity: Define the required input capacity in kilograms or tonnes per hour.

  3. Target granule size: Specify the finished particle-size range and acceptable size distribution.

  4. Metal and fiber removal: Establish the required cleanliness of the finished rubber.

  5. Energy and maintenance: Compare power requirements, blade wear, spare parts and routine maintenance needs.

  6. Line integration: Make sure the shredder, rasper, granulator, separators and screens have compatible processing capacities.

One common purchasing mistake is selecting a high-capacity tire shredder while ignoring the production capacity of the downstream granulator and separation equipment. The complete line should be balanced to avoid material accumulation and unnecessary downtime. For maintenance planning, see TWIN SHAFT SHREDDER MAINTENANCE GUIDE EXTEND SERVICE LIFE CUT OPERATIONAL COST and OPTIMIZING SHREDDER BLADE USAGE A COMPREHENSIVE GUIDE TO EFFICIENCY AND LONGEVITY.

6. Frequently Asked Questions

Q1: What is the most important machine for producing rubber granules from waste tires?
The rubber granulator is the main machine responsible for producing the target granule size. However, it needs prepared tire material from upstream shredding equipment and should work with magnetic separation, fiber removal and screening systems.

Q2: Can a double-shaft tire shredder produce finished rubber granules?
Usually not. A double-shaft shredder primarily produces larger tire chips. Additional size reduction through a rasper or rubber granulator is generally necessary to manufacture smaller and more uniform rubber granules.

Q3: Is a tire debeader necessary for every recycling line?
No. A debeader is useful for extracting steel bead wire before shredding, but its necessity depends on tire size, reinforcement, shredder design and production-line configuration.

Q4: Why does a rubber granule production line need a fiber separator?
Waste tires contain textile reinforcement. Fiber separators remove lightweight fibers from rubber particles, improving the cleanliness and consistency of the recovered rubber.

Q5: Can the same production line manufacture both rubber granules and rubber powder?
A granule production line can often be extended with additional grinding mills, fine screening and classification equipment. The final configuration depends on the required powder fineness, production capacity and product quality.

Conclusion

Producing rubber granules from waste tires requires a coordinated mechanical recycling system rather than a single machine. The main equipment includes a double-shaft tire shredder, secondary size-reduction equipment, magnetic separators, a rubber granulator, a fiber separator and a vibrating screen. Tire debeaders and cutters may also be needed depending on incoming material.

For recycling plant operators, the most important purchasing decision is to match every machine to required production capacity, tire characteristics and finished rubber granule specifications. A properly configured tire recycling line can recover valuable rubber, steel wire and textile materials while producing more consistent rubber granules for downstream manufacturing applications. For cost control, see FOCUS ON COST EFFICIENCY LONG TERM OPERATION LOW MAINTENANCE AUTOMATIC ELECTROMAGNETIC LINEAR GRINDING EQUIPMENT.

Contact HUATAO
Website: https://www.huataoshredder.com/
Email: marketing@huataogroup.com
Mobile / WhatsApp / WeChat: +86 13383116640

prev
What Is the Best Eddy Current Separator for Recovering Non-Ferrous Metals from Shredded Scrap?
recommended for you
Get in touch with us
We have over 16 years export experience and ensure the whole smoothly process for the Customer. We support the quality test report and third party inspection. 
Contact Us
Contact person: Rebecca Chiu
Tel: +86 13383116640
WhatsApp/Wechat/: +86 13383116640

viber/Skype: +86 13383116640

E-mail: Marketing@huataogroup.com

Add: No. 298 Zhonghua North Street, Xinhua District, Shijiazhuang City, Hebei, China.
Copyright © 2026 Shijiazhuang Huatao Import And Export Trade Co.,Ltd. | Sitemap | privacy policy
Contact us
wechat
whatsapp
Contact customer service
Contact us
wechat
whatsapp
cancel
Customer service